Access with VNC
Use JFrog Connect to enable VNC port forwarding to access and control your edge device.
You can gain port forwarding access to your edge device using a number of different port forwarding methods. This page describes an example procedure using VNC, a graphical desktop-sharing system that uses the Remote Frame Buffer protocol to remotely control your edge device.
Prerequisites
A VNC server is up and running on your edge device. If you do not have a VNC server on your device, you can refer to the RealVNC documentation for downloading and for installation and configuration.
VNC Viewer is downloaded and installed on your computer.
Open VNC Session
To start a VNC remote access session, do the following:
Go to Remote Access and choose the device you want to access.
Enter the port you would like to forward. Typically, the default port used by the VNC server is 5900. If you have a different VNC server port, enter the corresponding port number.
Click Open Session. Wait until Connect produces the Remote Access Address and copy it to your clipboard.
Open the VNC viewer on your computer. Paste the URL into the address bar and type Enter.
Click Continue on the subsequent popups. When prompted, enter your username and password and continue.
When the connection completes, the desktop of your edge device will appear and you will be able to work (even behind double-NAT or firewall) as you would on your own computer. If you are having difficulty connecting to the VNC server, see the RealVNC document Why can’t I connect.
What’s Next?
See an example of port forwarding using SSH.
Last updated